Adjusting the Routing Depth (see figures E–F)
- The routing depth must only be set while the power tool is switched off.
For adjustment of the routing depth, proceed as follows:
- Place the power tool with a fitted router bit onto the workpiece you want to machine.
- Open the clamping lever (10) if it is closed (➊).
- Align the rib (47) in the fixed routing base (2) with the depth adjustment channel (48) and the unlocking symbol
(➋). Slide in the fixed routing base (2) until roughly the required cutting depth is reached. - Turn the fixed routing base (2) until the rib (47) matches the locking symbol
to make the fine depth adjustment (➌). - Precisely set the required routing depth with the thumbwheel (4) (➍).
- Close the clamping lever (10) (➎).