Attaching the Hose and Vibrator Head (see figure B)

Place the power tool, hose (6) and vibrator head (5) down on a flat surface.

Unscrew the cap nut (7) from the power tool. Push the cap nut (7) into the correct position first over the vibrator head (5) and then over the hose (6). Remove the protective cap (12) from the hose (6). Insert the hose (6) with the tip of the flexible shaft (13) into the drive spindle (14). Secure the hose (6) in place by turning the cap nut (7) clockwise.